Index
Sitemap
Every public page. Wire forming, fabrication, and the 3/8 · 7/16 · 1/2 in directory — not a list of other companies.
Shop
- HomeUSA Wire Form.
- About50+ years of industry experience.
- Northeast OhioMills, wire drawers, short-haul coil.
- CapabilitiesWhat we run in 4–14 mm.
- EquipmentRobomac 214TF and the floor list.
- Secondary operationsWeld, plate, powder, ends, inspect.
- Instant quoteEstimate from diameter, bends, length, and material.
- VideosShop channel — CNC on camera.
- Request a quoteTooling, programming, coil minimums.
- ContactSTEP, STP, IGES, PDF, DXF, SLDPRT.
Process
- Wire formingUSA process map, 4–14 mm.
- Wire fabricationForm, weld, finish — carbon, stainless, non-ferrous.
- CNC wire forming2D and 3D from coil.
- CNC wire bendingSame cell as CNC forming.
- Rod bendingHeavy round coil in 4–14 mm.
- Wire partsHooks, baskets, grids, guards, racks, handles.
- 3/8 · 7/16 · 1/2 inStock production diameters.
- MaterialsCoil grades from carbon through stainless and brass.
- Design guideRadius, legs, springback, datums.
- Heavy wire forming (4–14 mm)The 4–14 mm band: frames, wire baskets, guards, and 3D CNC forms that light spring cells cannot run.
- 3D CNC wire formingProgrammable bends in multiple planes for 4–14 mm wire — frames, hooks, routing parts, and wire-basket geometry.
- 2D CNC wire formingAll bends in one plane. Faster programming, simpler tooling access, and the right choice when the part is flat.
- Wire form shapesThe centerline: cut-to-length, L, U, J, S, C, V, serpentine, eyes, rings, and closed frames in 4–14 mm.
- Fourslide / multislideCam tooling for frozen high-volume 2D forms. Explained here so CNC is not sold for the wrong job.
- Wire straighteningRotary or roll straightening before the first bend. Cast and helix in the coil become dimensional error in the form.
- Cut-to-lengthShear or saw cutoff in-line with CNC. End deformation, length tolerance, and when a separate cut station is required.
- End formingChamfer, coin, flatten, pierce, swage, and thread so the wire end mates to a hole, screw, or weld.
- Heat treatingStress relief of the form, and why heat-treat wire baskets are a product — not the same as running a furnace on every job.
- Plating and coatingRack zinc, zinc-nickel, and zinc-iron, then in-line powder — or dual coat. Pre-coated wire vs post-form finish on 4–14 mm.
- InspectionFixtures, overlays, and CMM for 2D and 3D wire forms. Put tolerance on the interface, not on every leg.
- Resistance weldingCross-wire and projection welds that close a form or attach a second piece without filler metal.
- MIG / TIG assemblyTack and fusion welds for frames and fixtures when resistance weld is the wrong joint or the wrong alloy.
- Mesh grids and cable traysWelded wire mesh, guard grids, and cable trays — resistance, MIG, and TIG after the form.
Hooks and rings
- S-hooksHeavy S-hooks in 3/8, 7/16, and 1/2 in — hang, lift, and plant hardware, not a 9-gauge store hook.
- D-ringsLoad-bearing D-rings in 3/8, 7/16, and 1/2 in for tie-down, strap, and frame hardware.
- Closed ringsRound closed rings and O-rings formed and welded in 3/8, 7/16, and 1/2 in coil.
- J-hooksRound-wire J-hooks in 3/8, 7/16, and 1/2 in for cable, hose, pipe, and plant hang.
- Lift hooksHeavy lift and tow hooks in 7/16 and 1/2 in — load-bearing 3D forms, not a light S-hook.
- Gate hooksGate hooks, catch hooks, and fence hardware in 3/8, 7/16, and 1/2 in galvanized or 304.
- Trailer latchesWire trailer and gate latches in 3/8, 7/16, and 1/2 in — hoops, catches, and keepers. Not a stamped over-center draw latch.
- Display hooksHeavy display and peg hooks in 3/8 in — retail and warehouse, not light 9-gauge pegboard wire.
- Powder-coating hooksC, S, V, and CV line hooks in 3/8, 7/16, and 1/2 in for hanging parts through a coating line.
- Eye formsEyes, eyelets, and loop ends in 3/8, 7/16, and 1/2 in — closed on the bender or welded shut.
- Load loopsLoad-bearing loops and bails in 3/8, 7/16, and 1/2 in for lift, hang, and strap points.
Hangers
- Cable hangersMessenger hangers and multi-loop cable supports in 3/8, 7/16, and 1/2 in for mines, plants, and utility.
- Solar hangersRound-wire hangers for solar rows — messenger and structure hang in 3/8, 7/16, and 1/2 in, 304 or galv.
- Hose hangersHose and air-line hangers in 3/8, 7/16, and 1/2 in for shops, mines, and plants.
- Pipe hangersRound-wire pipe hangers and clevis-style loops in 3/8, 7/16, and 1/2 in.
- U-hangersU-hangers and U-bolts in 3/8, 7/16, and 1/2 in — two legs, a radius, optional thread or flatten.
Grids and trays
- Heavy-duty wire basketsWelded rims and mesh in 3/8, 7/16, and 1/2 in — material handling, harvest, furnace, and facility.
- Cable traysWelded wire cable trays in 3/8, 7/16, and 1/2 in for data centers, solar, mining, and plants.
- Mesh gridsWelded mesh panels in 3/8, 7/16, and 1/2 in — guards, decks, shelves, and infill.
- Partition gridsWelded partition and cage panels in 3/8, 7/16, and 1/2 in for plants, cages, and facilities.
- Security mesh fencingWelded security mesh fence panels in 3/8, 7/16, and 1/2 in — rims, pitch, posts, and gates. Not chain-link roll.
- Wire shelvesWelded wire shelves in 3/8, 7/16, and 1/2 in — rims, pitch, and mounts, not chrome retail wire.
- Machine guardsWelded machine guards in 3/8, 7/16, and 1/2 in — frames, mesh, hinges, and mounts.
- Conveyor guardsConveyor side guards, return covers, and crossover grids in 3/8, 7/16, and 1/2 in.
- Fan guardsFan and blower guards with a 3/8, 7/16, or 1/2 in frame. Mesh infill named — not a 9-gauge residential register.
Frames and hardware
- Wire frames2D and 3D wire frames in 3/8, 7/16, and 1/2 in — seats, racks, furniture, and equipment outlines.
- Trellis and growing structuresOutdoor trellis and vertical-garden structure wire in 3/8, 7/16, and 1/2 in — frames, panels, and mounts. Not a 9-gauge tomato cage.
- HandlesEquipment, cart, trailer, and furniture handles in 3/8, 7/16, and 1/2 in — 2D or 3D, welded or bolted.
- L-pinsL-pins in 3/8, 7/16, and 1/2 in — hitch, implement, and trailer lock pins. A 90° bend, a length, a wire size.
- Pins and clipsHitch pins, linch-style pins, and heavy retainers in 3/8, 7/16, and 1/2 in. Hairpin and R-clips have their own page.
- Hitch pin clipsHairpin, R-clip, and bridge-pin retainers. Typical catalog clips sit under 4 mm — we name that. 3/8, 7/16, and 1/2 in when the print is heavy.
- BracketsWire brackets and retainers in 3/8, 7/16, and 1/2 in — 2D/3D CNC, not a stamped sheet bracket.
- Wire racksWelded wire racks in 3/8, 7/16, and 1/2 in — frames, shelves, and hooks as one assembly.
- Magazine racksMagazine and literature racks in 3/8, 7/16, and 1/2 in — lobby, plant, and showroom, not chrome 9-gauge retail.
- Newspaper racksNewspaper and periodical racks in 3/8, 7/16, and 1/2 in — outdoor galvanized or 304, not a stamped box.
- Wire displaysDisplay stands, arms, and grids in 3/8, 7/16, and 1/2 in — showroom and warehouse, not 9-gauge pegboard.
- Wire cartsWelded cart frames, baskets, and handles in 3/8, 7/16, and 1/2 in. Casters are the buyer’s, unless specified.
- Ground staplesU-staples in 3/8, 7/16, and 1/2 in for fabric, cable, erosion, and agriculture. Lighter sod sizes named if they fall below 4 mm.
- Rebar supportsHeavy rebar chairs, spacers, and supports in 3/8, 7/16, and 1/2 in — not 9-gauge masonry clips.
- U-anchorsSolid-wire U-anchors for precast and poured concrete lift in 3/8, 7/16, and 1/2 in. Not a forged headed anchor, not a wire-rope loop.
- Connecting linksConnecting links and chain-style loops in 3/8, 7/16, and 1/2 in, formed and welded.
- Hog ringsHog rings and C-rings in 3/8, 7/16, and 1/2 in for fencing, bags, and cages. 9-gauge upholstery rings sit under 4 mm and get named.
Shop lines
Industries
- AgricultureGround staples, equipment guards, harvest wire baskets, S-hooks, and galvanized forms that live outside.
- AI and data centersCable trays, wire baskets, and guards for high-density power and network builds.
- SolarTracker and rack forms, cable hangers, grounding, and outdoor stainless or galv.
- MiningHeavy 7/16 and 1/2 in guards, grids, trays, wire baskets, and cable hangers for harsh service.
- ConstructionRebar supports, brackets, S-hooks, D-rings, hangers, and heavy 4–14 mm forms for the jobsite — not light masonry clips.
- AutomotiveSeat frames, trailer latches, handles, L-pins, plant guards, and tie-down hardware in 3/8, 7/16, and 1/2 in — not music-wire clips.
- ArchitecturalScreens, security mesh, trellis, and frames in 3/8 to 1/2 in — building infill, not ornamental 9-gauge.
- Marine304 and 316 frames, baskets, and guards for wet service. Coil and finish named — not a marine-cert catalog.
- IndustrialPlant-floor guards, partitions, trays, baskets, and hangers in stock 3/8, 7/16, and 1/2 in coil.
- Manufacturing / OEMContract forms to the OEM print: frames, handles, guards, and hardware in 3/8, 7/16, and 1/2 in.
- ElectricalCable trays, J-hooks, hangers, and routing forms for plant and utility electrical — not 9-gauge clip wire.
- Interior designFurniture frames, racks, and display wire in 3/8 to 1/2 in. The furniture line, not a decorator catalog.
- Chemical304 / 316 washdown baskets, racks, and guards. Finish named. Not a coatings lab.
- PetroleumOutdoor hangers, guards, and trays at the pad. Galvanized, 304, or 330 when heat is the spec.
- RailroadHeavy guards, hangers, partitions, and baskets for yards and shops in 7/16 and 1/2 in.
- VentilationFan and HVAC guards with a 3/8 to 1/2 in frame. Light infill named, not a residential register.