Powder coating hooks
C-hooks
Lowest prices guaranteed. We will not be beat. 100-piece minimum. An open C. Clearance on the rack, a simple hang, a fast load. Powder coating C-hooks and paint-line C-hooks from coil.
How they hang
Wide parts, rack clearance, and lines where operators load and strip all day.
Open throat. Gap and inside radius on the print. Pointed ends when the spec wants a bite.
4–10 mm bag prices
Same diameter and length steps as the published 0.180 in / 0.250 in finishing-hook bags, plus metric sizes in between. Two percent under those bag prices. All three styles.
USA Wire Form part numbers (USAWF-). 4–10 mm powder coating hooks, 2% under published 0.180 in and 0.250 in bag prices. Same lengths and bag counts. Carbon. Steel in the lot. 100-piece minimum. Nothing under 4 mm — 0.044–0.120 in is not this cell.
4 mm · 0.157 in · 1½ in arch
| Part no. | Length | Qty | Lot | Each |
|---|---|---|---|---|
| USAWF-C-4-04 | 4 in | 500 | $94.52 | $0.19 |
| USAWF-C-4-06 | 6 in | 500 | $122.27 | $0.24 |
| USAWF-C-4-07 | 7 in | 500 | $128.27 | $0.26 |
| USAWF-C-4-08 | 8 in | 250 | $75.01 | $0.30 |
| USAWF-C-4-10 | 10 in | 250 | $86.26 | $0.35 |
| USAWF-C-4-12 | 12 in | 250 | $94.52 | $0.38 |
| USAWF-C-4-24 | 24 in | 100 | $148.16 | $1.48 |
4.57 mm · 0.180 in · 1½ in arch
| Part no. | Length | Qty | Lot | Each |
|---|---|---|---|---|
| USAWF-C-180-04 | 4 in | 500 | $123.48 | $0.25 |
| USAWF-C-180-06 | 6 in | 500 | $159.74 | $0.32 |
| USAWF-C-180-07 | 7 in | 500 | $167.58 | $0.34 |
| USAWF-C-180-08 | 8 in | 250 | $98.00 | $0.39 |
| USAWF-C-180-10 | 10 in | 250 | $112.70 | $0.45 |
| USAWF-C-180-12 | 12 in | 250 | $123.48 | $0.49 |
| USAWF-C-180-24 | 24 in | 100 | $193.56 | $1.94 |
5 mm · 0.197 in · 1½ in arch
| Part no. | Length | Qty | Lot | Each |
|---|---|---|---|---|
| USAWF-C-5-04 | 4 in | 500 | $147.68 | $0.30 |
| USAWF-C-5-06 | 6 in | 500 | $191.05 | $0.38 |
| USAWF-C-5-07 | 7 in | 500 | $200.42 | $0.40 |
| USAWF-C-5-08 | 8 in | 250 | $117.21 | $0.47 |
| USAWF-C-5-10 | 10 in | 250 | $134.79 | $0.54 |
| USAWF-C-5-12 | 12 in | 250 | $147.68 | $0.59 |
| USAWF-C-5-24 | 24 in | 100 | $231.50 | $2.31 |
6 mm · 0.236 in · 1½ in arch
| Part no. | Length | Qty | Lot | Each |
|---|---|---|---|---|
| USAWF-C-6-04 | 4 in | 250 | $257.23 | $1.03 |
| USAWF-C-6-06 | 6 in | 250 | $241.49 | $0.97 |
| USAWF-C-6-07 | 7 in | 500 | $288.61 | $0.58 |
| USAWF-C-6-08 | 8 in | 250 | $275.61 | $1.10 |
| USAWF-C-6-10 | 10 in | 250 | $312.36 | $1.25 |
| USAWF-C-6-12 | 12 in | 250 | $342.98 | $1.37 |
| USAWF-C-6-24 | 24 in | 100 | $333.35 | $3.33 |
6.35 mm · 0.250 in · 1½ in arch
| Part no. | Length | Qty | Lot | Each |
|---|---|---|---|---|
| USAWF-C-250-04 | 4 in | 250 | $288.12 | $1.15 |
| USAWF-C-250-06 | 6 in | 250 | $270.48 | $1.08 |
| USAWF-C-250-07 | 7 in | 500 | $323.26 | $0.65 |
| USAWF-C-250-08 | 8 in | 250 | $308.70 | $1.23 |
| USAWF-C-250-10 | 10 in | 250 | $349.86 | $1.40 |
| USAWF-C-250-12 | 12 in | 250 | $384.16 | $1.54 |
| USAWF-C-250-24 | 24 in | 100 | $373.38 | $3.73 |
8 mm · 0.315 in · 1½ in arch
| Part no. | Length | Qty | Lot | Each |
|---|---|---|---|---|
| USAWF-C-8-04 | 4 in | 250 | $457.30 | $1.83 |
| USAWF-C-8-06 | 6 in | 250 | $429.31 | $1.72 |
| USAWF-C-8-07 | 7 in | 500 | $513.09 | $1.03 |
| USAWF-C-8-08 | 8 in | 250 | $489.97 | $1.96 |
| USAWF-C-8-10 | 10 in | 250 | $555.30 | $2.22 |
| USAWF-C-8-12 | 12 in | 250 | $609.74 | $2.44 |
| USAWF-C-8-24 | 24 in | 100 | $592.63 | $5.93 |
10 mm · 0.394 in · 1½ in arch
| Part no. | Length | Qty | Lot | Each |
|---|---|---|---|---|
| USAWF-C-10-04 | 4 in | 250 | $714.54 | $2.86 |
| USAWF-C-10-06 | 6 in | 250 | $670.79 | $2.68 |
| USAWF-C-10-07 | 7 in | 500 | $801.70 | $1.60 |
| USAWF-C-10-08 | 8 in | 250 | $765.58 | $3.06 |
| USAWF-C-10-10 | 10 in | 250 | $867.65 | $3.47 |
| USAWF-C-10-12 | 12 in | 250 | $952.72 | $3.81 |
| USAWF-C-10-24 | 24 in | 100 | $925.98 | $9.26 |
Custom c-hooks builder
How we form them
C-hooks are an open ring in 2D CNC. Gap, inside radius, and whether the ends are pointed or radiused are the quote. They are the usual powder coating hook when the part needs clearance more than a locked hang.
Stock 3/8, 7/16, and 1/2 in. Other sizes in 4–14 mm need tooling. Under 4 mm is not this cell. Bright carbon into the booth; 304 when the washer is wet chemistry.
Custom length, openings, and 90° rotation: custom powder coating hooks. Stainless: stainless steel powder coating hooks. Band: 4–14 mm (0.157–0.551 in). Listed 4–10 mm lots include carbon. Custom C, CV, and S outside the grid: you buy the coil.
Typical jobs
- Powder coating C-hooks for wide parts
- Finishing-rack C-hooks
- Paint-line and curing-oven C-hooks
- Stainless steel C-hooks for wash lines
FAQ
When should I use C-hooks instead of V-hooks?
C-hooks when you need an open hang and rack clearance. V-hooks when the part has to sit centered and stay put through wash, coat, and cure.
Do you make stainless steel C-hooks?
Yes, from 304 or 316 coil in 4–14 mm. You buy the coil. 100-piece minimum.
Related
- Powder Coating Hooks
- Powder coating V-hooks
- V-Hooks
- CV-Hooks
- S-Hooks
- 90 Degree Hooks
- S-hooks vs V-hooks vs C-hooks
- Product directory — powder-coating hooks
In this branch