Rotated hang

90° V-hooks

Lowest prices guaranteed. We will not be beat. 100-piece minimum. 90° V-hooks take the V locate and crank it off the bar. Tight conveyor centers, oven face, rack clearance. Still a powder coating V-hook — one extra bend.

V-hook · 90° dual V · from coil

Lowest prices guaranteed. We will not be beat. 100-piece minimum. V-hooks: we buy the steel — 1018, galvanized, 304, or 316 is in the estimate. $1.00 per cut, $0.09 per developed inch on 3/8 in (heavier wire scales by section), then 5% off. Bends are in the drawing, not billed. 7/16 and 1/2 in are stock on this cell. 4–14 mm only. Catalog 0.080–0.120 in is below the floor; 4 mm (0.157 in) is the step up.

1018 carbon 90° V-Hook

$277.34est. total

Qty: 100 pcs · 4–14 mm · shop steel

Custom hook summary

Hook type: 90° V-Hook
Wire size: 3/8 in (0.375 in)
Overall length: 12"
Leg length ID: 1.5"
Material: 1018 carbon (bright / mill)
Quantity: 100 pcs
Forming: 1 cut · 6 bends · 16.24 in developed
Steel (shop): 0.509 lb · $0.46
5% under boxed 3/8: −$0.15
Per piece: $2.77
Lot: $277.34

No deposit cart. Email the estimate, or send a print on contact. All instant quotes are subject to quote department review.

Material

Hook type

Wire size

Stock tooling.

Overall length, inches

V-style max 48 in. C, CV, and S max 42 in. Must exceed leg ID.

Leg length ID, inches

Inside leg dimension. 0.25 in steps. Less than overall.

Total quantity (100 min)

100 pcs to start. −5% at 1,000. −10% at 10,000.

Additional notes

Email this estimate

Off the bar

A 90 degree V-hook is a V with a right-angle offset so the part hangs beside the rack bar instead of in line with it. Call the rotation, both openings, and overall length. We buy the steel.

FAQ

What are 90° V-hooks for?

Rack clearance and part orientation through wash, coat, and cure when a straight V hangs into the next station or shadows the gun.

Rotated hang

90° V-hooks

V-hook · 90° dual V · from coil

1018 carbon 90° V-Hook

$277.34est. total

Qty: 100 pcs · 4–14 mm · shop steel

Custom hook summary

Hook type: 90° V-Hook
Wire size: 3/8 in (0.375 in)
Overall length: 12"
Leg length ID: 1.5"
Material: 1018 carbon (bright / mill)
Quantity: 100 pcs
Forming: 1 cut · 6 bends · 16.24 in developed
Steel (shop): 0.509 lb · $0.46
5% under boxed 3/8: −$0.15
Per piece: $2.77
Lot: $277.34

No deposit cart. Email the estimate, or send a print on contact. All instant quotes are subject to quote department review.

Material

Hook type

Wire size

Stock tooling.

Overall length, inches

V-style max 48 in. C, CV, and S max 42 in. Must exceed leg ID.

Leg length ID, inches

Inside leg dimension. 0.25 in steps. Less than overall.

Total quantity (100 min)

100 pcs to start. −5% at 1,000. −10% at 10,000.

Additional notes

Email this estimate

Off the bar

A 90 degree V-hook is a V with a right-angle offset so the part hangs beside the rack bar instead of in line with it. Call the rotation, both openings, and overall length. We buy the steel.

FAQ

What are 90° V-hooks for?

Rack clearance and part orientation through wash, coat, and cure when a straight V hangs into the next station or shadows the gun.

90° V-hooks

Off the bar

FAQ

What are 90° V-hooks for?

Related

90° V-hooks

Off the bar

FAQ

What are 90° V-hooks for?

Related