Carbon coil

Steel V-hooks

Lowest prices guaranteed. We will not be beat. 100-piece minimum. Everyday steel V-hooks: 1018 bright or mill into the booth, galvanized when the hook itself lives outside. Powder coating, paint line, and rack hang from coil.

V-hook · dual V · rack and part · from coil

Lowest prices guaranteed. We will not be beat. 100-piece minimum. V-hooks: we buy the steel — 1018, galvanized, 304, or 316 is in the estimate. $1.00 per cut, $0.09 per developed inch on 3/8 in (heavier wire scales by section), then 5% off. Bends are in the drawing, not billed. 7/16 and 1/2 in are stock on this cell. 4–14 mm only. Catalog 0.080–0.120 in is below the floor; 4 mm (0.157 in) is the step up.

1018 carbon V-Hook

$260.50est. total

Qty: 100 pcs · 4–14 mm · shop steel

Custom hook summary

Hook type: V-Hook
Wire size: 3/8 in (0.375 in)
Overall length: 12"
Leg length ID: 1.5"
Material: 1018 carbon (bright / mill)
Quantity: 100 pcs
Forming: 1 cut · 4 bends · 14.74 in developed
Steel (shop): 0.462 lb · $0.42
5% under boxed 3/8: −$0.14
Per piece: $2.61
Lot: $260.50

No deposit cart. Email the estimate, or send a print on contact. All instant quotes are subject to quote department review.

Material

Hook type

Wire size

Stock tooling.

Overall length, inches

V-style max 48 in. C, CV, and S max 42 in. Must exceed leg ID.

Leg length ID, inches

Inside leg dimension. 0.25 in steps. Less than overall.

Total quantity (100 min)

100 pcs to start. −5% at 1,000. −10% at 10,000.

Additional notes

Email this estimate

1018 and galvanized

Steel V-hooks here are carbon coil. Bright or mill for line hooks that go into a booth. Galvanized when the V-hook is the finished part, not the hanger.

Stainless is a different lander when the washer eats carbon.

FAQ

What steel do you form V-hooks from?

1018 carbon is the usual. Galvanized carbon when the print wants it. We buy the steel — it is in the price. 100-piece minimum.

Carbon coil

Steel V-hooks

V-hook · dual V · rack and part · from coil

1018 carbon V-Hook

$260.50est. total

Qty: 100 pcs · 4–14 mm · shop steel

Custom hook summary

Hook type: V-Hook
Wire size: 3/8 in (0.375 in)
Overall length: 12"
Leg length ID: 1.5"
Material: 1018 carbon (bright / mill)
Quantity: 100 pcs
Forming: 1 cut · 4 bends · 14.74 in developed
Steel (shop): 0.462 lb · $0.42
5% under boxed 3/8: −$0.14
Per piece: $2.61
Lot: $260.50

No deposit cart. Email the estimate, or send a print on contact. All instant quotes are subject to quote department review.

Material

Hook type

Wire size

Stock tooling.

Overall length, inches

V-style max 48 in. C, CV, and S max 42 in. Must exceed leg ID.

Leg length ID, inches

Inside leg dimension. 0.25 in steps. Less than overall.

Total quantity (100 min)

100 pcs to start. −5% at 1,000. −10% at 10,000.

Additional notes

Email this estimate

1018 and galvanized

Steel V-hooks here are carbon coil. Bright or mill for line hooks that go into a booth. Galvanized when the V-hook is the finished part, not the hanger.

Stainless is a different lander when the washer eats carbon.

FAQ

What steel do you form V-hooks from?

1018 carbon is the usual. Galvanized carbon when the print wants it. We buy the steel — it is in the price. 100-piece minimum.

Steel V-hooks

1018 and galvanized

FAQ

What steel do you form V-hooks from?

Related

Steel V-hooks

1018 and galvanized

FAQ

What steel do you form V-hooks from?

Related